This Phase-Changer 18 supplies the 3 phase power to operate an olive processing plant. This is an on-farm operation, and is fed from a SWER (Single Wire Earth Return) single phase utility power-line. The machine itself has many components & motors including a large centrifuge motor for oil separation.

A very common application. Woodworking machinery. In this case a large panel saw, an edge- sander and a dust extraction system are powered by a Phase-Changer 11. And all from a 240V single phase supply. All woodworkig machines can be powered by a Phase-Changer, including combination machines.

This PC8 operates a MIG Welder, a folder, a large guillotine and a punch & shear machine. This is a very remote business, a long long way from any 3 phase power lines .A second converter, a PC11, is now being supplied to power the extraction fans on a paint spray booth.

Phase-Changer 3 used to power 3 phase refrigeration compressor and icecream maker in vendors
van. This allows operation from a 240V single phase supply which is often available at events & venues.

These 2 units supply the 3 phase required in a stone fruit packing shed. One unit runs the entire grading machine (shown) which has many motors. The second unit powers the 10HP cool room and is fitted with the auto-start option, ensuring it only runs when required.

The German manufacturer of this very expensive knitting machine said "it cannot be done". 3 phase operating voltages required are very precise. But this combination of our PC8 with the optional neutral balancing transformer works really well & all from a 240V supply!

This Phase-Changer 30 supplies 3 phase power to a large chiller (2 X 11KW internal 'can' compressors) and numerous three phase pumps. It is fitted with the remote start option, so it only runs when required.

When the customer purchased this PC8, we did not know he was planning on buying a big 440Amp MIG welder. When we visited and took this photo, with a smile, he admitted, he has run it a full power "just to see if it worked". Normally we'd recommend a PC11 for a welder this big. PC8 is fine to about 350A max.

Car Hoists: hydraulic and screw based (many)
Tyre Balancing and Tyre Changing Machines
Air Compressors (another regular)
Cheese Factories: (X2), Moulding machines, stretcher, pasteurizer, packaging
Printing: Various printing and paper folding machines.
Saw Mill: Docking Saws
Chain Wire Fence Manufacturing Machine
Lathes, Milling Machines (from very small to large CNC)
Metal Cutting Cold Saws
Pressure Washers
Horticulture: Computer Controlled Potting and Seeding Machines
Air-conditioning Systems
Refrigerated Trucks, Refrigerated Shipping Containers
Water Pumps: including submersible
Oil Fired Boiler Controls and Pumps for Heating Hot-Houses (tomatoes)
Stone Masonry: Cutting, Grinding and Polishing Machinery
Surface Grinders
High Pressure Water Cutting (hydraulic) Machine
Agriculture: Pivot and Linear Irrigators; Drive Wheels Control System
Saw Blade Sharpening and Automatic RF Tip Brazing Machine
Wine Bottling and Labeling Machines